Floating Elevated Hoists and Cranes

Australia | South Pacific

Boat Mounted Portable Hoists and Cranes

Floating Crane Hoist Floating Crane Hoist Floating Crane Hoist Floating Crane Hoist Floating Crane Hoist Floating Crane Hoist Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform Floating Elevated Platform

Floating Elevated Hoist Platforms

Our floating elevated work platforms have been specially designed and built to cater for the requirements of the under bridge structural inspections required for most structures - roads - rail bridges, that span across water ways.

Our floating EWP units have been certified and built to operate in each vessel and cover working heights from 1.8m to 15m working height. These units enable you to gain access to the underside of any structure spanning over a water way that may require an inspection or maintenance and has the ability to manoeuvre into position very rapidly.

Each vessel of operation has been stability certified for the full operation capacity of each EWP unit ensuring complete safety during the operation process and thus peace of mind while you are on the water.


Floating Crane Hoist

Our floating vessel mounted crane hoist is capable of lifting and shifting loads up to 1 tonne and with a reach of over 3 meters this crane is a versatile light weight work horse. Features include full remote radio controls, a fully extendable hydraulic boom and slew system and a powerful electric winch system allowing loads to be winched from water depths of greater than 15m. The unit only requires a single 12 volt battery for operation with minimal noise output.

This equipment is ideal for assisting many on water tasks including working on mooring system, navigation buoy maintenance, anode installations, salvage, wharf fender maintenance and much more.

The crane system can be mobilised onsite mounted in our vessel and can be road transported on our boat trailer so it’s ready to launch and go straight to work with no time in setting the system up at all.