Commercial Diving Services - Boat & Barge Hire

Barges

  • Various configurations - bolted together for work platforms

  • Single barge to 38 tonne total immersed buoyancy

  • Size 12m length x 3.3m wide x 1.2m deep

  • Size 6m length x 3.3m wide x 1.2m deep

Boats

Due to Commercial Diving Services Pty Ltd requirement in an extensive field of on water boat and barge applications we have developed and own a broad range of versatile, practical, portable and mostly road transportable range of crafts and barges. Barges can be bolted together for custom sized platforms while our powerful and versatile ocean going work boats can be trailered to fulfill your demand and needs.

  • Work boat hire

  • 2c offshore rating

  • Sheltered water boats for dams and ports

  • Competent and certified operators
 Two 12m Barges Two 12m Barges Barge and Boat Hire
   
   
   

8m dive boat for hire (multiple applications)

  • Class 2c survey commercial vessel NSW Maritime Approved

  • Hull length 8mt

  • Beam width 2.5mt

  • Overall length 8.8mt

  • Powered by 250hp four stroke out board motor with hight thrust propeller

  • Auxiliary motor 30hp four stoke motor with high thrust propeller

  • Lockable forward compartment

  • Weather proof side covers(roll down to stop rain)

  • Max persons capacity 13 (with conditions)

  • Max fuel capacity 200 litres

  • Max capacity of vessel 1290 kgs

  • Road transportable without any RTA restrictions

This vessel was custom built out of aluminium plate very practical work boat very fuel efficient four stroke motor great offshore vessel.

8m Dive Boat 8m Dive Boat 8m Dive Boat
   
   
   

7.5m work vessel for hire or marine applications

  • Current NSW commercial vessel registration(sheltered waters)

  • 7.5mt hull length

  • Beam width 3.0m

  • Measured total length 8.5mt
  • Powered by 2x 100hp four stroke outboard motors with ssteel propellers

  • Max fuel capacity 200 Litres

  • Max capacity persons 12

  • Currently moored

  • Not road transportable unless on a wide load permit

Vessel is constructed form aluminium plate with solid floor and low sides approx 400mm from deck to top of gunnel. Great work boat very stable and ample room for persons or equipment. 

7.5m Work Vessel 7.5m Work Vessel
   
   
   

7.4m work punt / boat for hire

  • Currently in NSW commercial registration (sheltered waters)

  • Hull length 7.45mt

  • Beam width 2.35mt

  • Overall measured length 7.45mt

  • Powered by 60hp four stroke outboard motor tiller steer with high thrust propeller

  • Max capacity in persons 9 persons

  • Aluminium canopy with weather shields

  • Very large work area flat deck space

Vessel constructed from aluminium. Great work boat and very stable. Only suitable to operate in sheltered waters.

 7.4m Work Punt 7.4m Work Punt
   
   
   

4.8m work vessel / punt for hire

  • Currently registered commercial vessel NSW (Sheltered waters only)

  • Hull length 4.8mt

  • Powered by 30hp four stroke motor with high thrust propeller

  • Very heavy duty double skin 4mm aluminium bottom

  • 5mm aluminium deck with foam filled gunnels

  • Open clear deck space

  • Very manoeuvrable boat

  • Can operate on standard boat licence
4.8m Work Punt
   
   
   

3m poly craft boat for hire

  • Hull length 3m

  • Powered by 15hp out board

  • Capacity 3 persons

  • Operate on normal boat licence

 3m Poly Craft